 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
GRUNDFOS Blueflux®
Advanced motor technology that reduces energy waste in pump
applications
Advanced motor technology that reduces energy waste in pump
applications
- Authorized Distributor of
- Grundfos Pumps India Private Limited
- Qua Water Technologies Private Limited
- Tranter India Private Limited
- Raje-Dia Pumps Private Limited
Continue... 2 <Previous Page>
Continue... 2 <Previous Page>
What makes Grundfos Blueflux® better?
Grundfos Blueflux® combines Grundfos competences in three vital areas: motors, VFDs and
pump design
Every aspect of the technology driving a Grundfos Blueflux® solution has been developed to answer the
real needs of the applications it is installed in – and always with an emphasis on reliability and efficiency.
Grundfos Blueflux® combines Grundfos competences in three vital areas: motors, VFDs and
pump design
Every aspect of the technology driving a Grundfos Blueflux® solution has been developed to answer the
real needs of the applications it is installed in – and always with an emphasis on reliability and efficiency.
Minimised energy loss
Grundfos Blueflux® motors’ efficiency has been achieved
through extensive design optimisation. Using state-of-the-art
computer simulations, Grundfos engineers have succeeded in
minimising the four main types of losses that occur in an
electrical motor:
1) Excessive losses in the stator windings,
2) Losses in stator and rotor laminations due to eddy currents
and hysteresis,
3) Losses due to current flow in rotor bars and end rings and
4) Losses due to friction in the bearings.
Grundfos Blueflux® motors’ efficiency has been achieved
through extensive design optimisation. Using state-of-the-art
computer simulations, Grundfos engineers have succeeded in
minimising the four main types of losses that occur in an
electrical motor:
1) Excessive losses in the stator windings,
2) Losses in stator and rotor laminations due to eddy currents
and hysteresis,
3) Losses due to current flow in rotor bars and end rings and
4) Losses due to friction in the bearings.
Cool-running
The efficiency of Grundfos Blueflux® motors means that a
minimum of energy is lost, which reduces the amount of heat
generated. This means less power is needed for fan cooling and
that in turn means less noise is generated. The cooler motor
also means longer lifetime on bearings, insulation material and
less heat to the ambient environment.
In addition, Grundfos Blueflux® solutions with integrated
variable frequency drives require only one fan to cool the
motor and drive.
The efficiency of Grundfos Blueflux® motors means that a
minimum of energy is lost, which reduces the amount of heat
generated. This means less power is needed for fan cooling and
that in turn means less noise is generated. The cooler motor
also means longer lifetime on bearings, insulation material and
less heat to the ambient environment.
In addition, Grundfos Blueflux® solutions with integrated
variable frequency drives require only one fan to cool the
motor and drive.
Better bearing conditions
The lower operating temperature of Grundfos Blueflux® motors
ensures that their bearings need less frequent re-greasing.
Only recognised high quality bearings are used and in larger
Grundfos Blueflux® motors with variable frequency drives (11-
22 kW), a bearing monitoring function automatically displays a
warning when it is time for re-greasing or bearing replacement.
The lower operating temperature of Grundfos Blueflux® motors
ensures that their bearings need less frequent re-greasing.
Only recognised high quality bearings are used and in larger
Grundfos Blueflux® motors with variable frequency drives (11-
22 kW), a bearing monitoring function automatically displays a
warning when it is time for re-greasing or bearing replacement.
The right drive configuration
With Grundfos Blueflux® you can be sure that the VFD is
configured correctly for the job at hand. Because all software
and interfaces are purpose-built, installation error is eliminated
and establishing the right performance levels is a
straightforward task.
External VFDs come with unique software for 33 Grundfos
pump ranges. The integrated drives are fully pre-programmed
at the Grundfos factory and then delivered as plug ’n’ pump
solutions.
One of the most crucial challenges in pump performance is
keeping one or more values constant. That is why Grundfos
Blueflux® drives have a range of special features that
maintain system control over a range of parameters such as
constant pressure, constant differential pressure, proportional
pressure, constant level and constant temperature.
With Grundfos Blueflux® you can be sure that the VFD is
configured correctly for the job at hand. Because all software
and interfaces are purpose-built, installation error is eliminated
and establishing the right performance levels is a
straightforward task.
External VFDs come with unique software for 33 Grundfos
pump ranges. The integrated drives are fully pre-programmed
at the Grundfos factory and then delivered as plug ’n’ pump
solutions.
One of the most crucial challenges in pump performance is
keeping one or more values constant. That is why Grundfos
Blueflux® drives have a range of special features that
maintain system control over a range of parameters such as
constant pressure, constant differential pressure, proportional
pressure, constant level and constant temperature.
Component quality
Grundfos controls the entire Grundfos Blueflux® supply chain,
which guarantees all components are of the very highest
quality. Our manufacturing facilities are certified to ISO 9000
standards or higher and our machining techniques ensure
complete uniformity.
This means that a Grundfos Blueflux® solution is built to last,
on the outside and within. For example, the housings of both
motor and VFD are built especially for operation in the harsh
conditions so common in industry. The connections between
PCB circuits prevent vibration damage. The PCBs themselves
are interconnected with lead frames and connectors rather
than cables for extra durability.
Grundfos controls the entire Grundfos Blueflux® supply chain,
which guarantees all components are of the very highest
quality. Our manufacturing facilities are certified to ISO 9000
standards or higher and our machining techniques ensure
complete uniformity.
This means that a Grundfos Blueflux® solution is built to last,
on the outside and within. For example, the housings of both
motor and VFD are built especially for operation in the harsh
conditions so common in industry. The connections between
PCB circuits prevent vibration damage. The PCBs themselves
are interconnected with lead frames and connectors rather
than cables for extra durability.
The responsible choice will pay back more
Grundfos Blueflux® not only starts saving energy immediately, it also has a
very short payback time on investment
On average 85% of a normal pump system’s Life Cycle Cost (LCC) is energy. Switching to Grundfos
Blueflux® can provide an LCC reduction of up to 50% – not to mention a serious reduction in related
emissions. And while Grundfos Blueflux® can initially cost a little more, the payback period for this
difference is usually less than 2 years. After this short period, the substantial financial and environmental
benefits just keep on growing.
Grundfos Blueflux® not only starts saving energy immediately, it also has a
very short payback time on investment
On average 85% of a normal pump system’s Life Cycle Cost (LCC) is energy. Switching to Grundfos
Blueflux® can provide an LCC reduction of up to 50% – not to mention a serious reduction in related
emissions. And while Grundfos Blueflux® can initially cost a little more, the payback period for this
difference is usually less than 2 years. After this short period, the substantial financial and environmental
benefits just keep on growing.
There are 5 sides to the number 1
Behind Grundfos Blueflux® lies an expert understanding of the real challenges faced in professional sector
pump applications. That is why it delivers substantial benefits in the 5 most important areas.
Lower life cycle costs
Once a Grundfos Blueflux® product is switched on, it starts saving. Far more efficient than conventional
motor technology, Grundfos Blueflux® solutions with VFDs can reduce energy consumption by up to 60%.
Energy generally accounts for 85% of a pump’s overall life-cycle costs – Grundfos Blueflux® solutions can
often reduce the lifecycle costs by up to 50%.
The outstanding reliability of Grundfos Blueflux®
Reduces day-to-day service costs. Every Grundfos Blueflux® solution is built to thrive in the harsh and
demanding operating conditions so common in the professional sectors.
Superior system control
Grundfos Blueflux® VFDs are perfectly matched to the pump they are attached to. When used in
combination with a sensor they enable a very fine and consistent level of control over chosen parameters.
Longer operational lifetime
Grundfos Blueflux® doesn’t just save more, it saves for longer. All the components are of Grundfos quality
and each motor and VFD is designed to operate for years and with minimised wear and tear in mind.
Lower environmental impact
Grundfos Blueflux® not only reduces emissions through operational efficiency, Grundfos also makes the
manufacturing process as efficient as possible and uses components with a very high degree of recyclability.
Behind Grundfos Blueflux® lies an expert understanding of the real challenges faced in professional sector
pump applications. That is why it delivers substantial benefits in the 5 most important areas.
Lower life cycle costs
Once a Grundfos Blueflux® product is switched on, it starts saving. Far more efficient than conventional
motor technology, Grundfos Blueflux® solutions with VFDs can reduce energy consumption by up to 60%.
Energy generally accounts for 85% of a pump’s overall life-cycle costs – Grundfos Blueflux® solutions can
often reduce the lifecycle costs by up to 50%.
The outstanding reliability of Grundfos Blueflux®
Reduces day-to-day service costs. Every Grundfos Blueflux® solution is built to thrive in the harsh and
demanding operating conditions so common in the professional sectors.
Superior system control
Grundfos Blueflux® VFDs are perfectly matched to the pump they are attached to. When used in
combination with a sensor they enable a very fine and consistent level of control over chosen parameters.
Longer operational lifetime
Grundfos Blueflux® doesn’t just save more, it saves for longer. All the components are of Grundfos quality
and each motor and VFD is designed to operate for years and with minimised wear and tear in mind.
Lower environmental impact
Grundfos Blueflux® not only reduces emissions through operational efficiency, Grundfos also makes the
manufacturing process as efficient as possible and uses components with a very high degree of recyclability.
Discover how a Pump Audit can lead to savings in
your application
A Grundfos Pump Audit is the most effective way to analyse whether your
pump system is operating as effectively as it could be. It compares the Life
Cycle Costs of your system with a more optimised configuration and product
choice.
your application
A Grundfos Pump Audit is the most effective way to analyse whether your
pump system is operating as effectively as it could be. It compares the Life
Cycle Costs of your system with a more optimised configuration and product
choice.
Latest Updates
Nov 1, 2011
Grundfos | Pumps for
paper industry
Sep 8, 2011
Grundfos Blueflux |
Advanced motor
technology for pumps
that reduces energy waste
Aug 22, 2011
CRN High Pressure
Programme
Jul 23, 2011
Grundfos CRT | Titanium
at work for industry
Jul 2, 2011
Grundfos Remote
Management |
Internet-based pump
monitoring
May 28, 2011
Grundfos | CRN Air
Cooled Top
May 7, 2011
Grundfos | Buy the
Original
Mar 12, 2011
Grundfos S Series -
Submersible and dry
installed pumps for
aggressive environments
Feb 19, 2011
The SP system | Strength
all the way
Jan 29, 2011
Grundfos | Cost of
Ownership
Nov 14, 2010
Grundfos CR | Innovation
Inside
Sep 3, 2010
Grundfos | Pumps on tour
Jul 31, 2010
Manufacturers of IBR
Steam Boilers
Jul 10, 2010
Grundfos KP/KPV |
Horizontal & vertical
double suction split case
pumps
Jun 21, 2010
Grundfos CM | The new
generation of horizontal
multistage pumps
Jun 17, 2010
How Grundfos large
storm water pumps helps
BigB's house from
flooding?
Jun 8, 2010
Grundfos DPK | High
Pressure and Reliable
Drainage Pumps
May 14, 2010
Grundfos Solutions |
Increasing performance
in Industrial Process
Apr 22, 2010
Grundfos Solutions |
Increasing performance
in Plant Service Systems
March 26, 2010
Grundfos Dosing &
Disinfection | Get the
right mix
March 12, 2010
Grundfos Direct Sensors
March 2, 2010
Grundfos Fire Protection
Solutions | Fire protection
you can count on
February 11, 2010
Grundfos in Burj Khalifa |
A towering achievement
Grundfos pumps secure
clean water for thousands
of people in Haiti
February 10, 2010
Tranter plate & frame
heat exchangers |
Bringing efficiency to heat
transfer
February 4, 2010
TRANTER Econocoil | An
efficient & versatile light
duty plate type heat
exchanger
January 29, 2010
TRANTER | Gasketed and
welded heat exchangers
for every need
January 22, 2010
Unilift CC | Multi-purpose
submersible drainage
pumps
January 14, 2010
Grundfos TP | The widest
range of in-line choices
January 7, 2010
GRUNDFOS END-suction
range | Perfection under
high demands
January 1, 2010
Grundfos Alldos OXIPERM
PRO - Effective and safe
disinfection with Chlorine
Dioxide
December 25, 2009
Replace it - even if it isn't
broken
December 19, 2009
Grundfos in Boiler Feed
Systems
December 12, 2009
Grundfos - Wastewater
December 5, 2009
Grundfos - PUMP AUDIT
November 28, 2009
Magnetic Drive Pumps
from Grundfos
CRN MAGdrive
Nov 1, 2011
Grundfos | Pumps for
paper industry
Sep 8, 2011
Grundfos Blueflux |
Advanced motor
technology for pumps
that reduces energy waste
Aug 22, 2011
CRN High Pressure
Programme
Jul 23, 2011
Grundfos CRT | Titanium
at work for industry
Jul 2, 2011
Grundfos Remote
Management |
Internet-based pump
monitoring
May 28, 2011
Grundfos | CRN Air
Cooled Top
May 7, 2011
Grundfos | Buy the
Original
Mar 12, 2011
Grundfos S Series -
Submersible and dry
installed pumps for
aggressive environments
Feb 19, 2011
The SP system | Strength
all the way
Jan 29, 2011
Grundfos | Cost of
Ownership
Nov 14, 2010
Grundfos CR | Innovation
Inside
Sep 3, 2010
Grundfos | Pumps on tour
Jul 31, 2010
Manufacturers of IBR
Steam Boilers
Jul 10, 2010
Grundfos KP/KPV |
Horizontal & vertical
double suction split case
pumps
Jun 21, 2010
Grundfos CM | The new
generation of horizontal
multistage pumps
Jun 17, 2010
How Grundfos large
storm water pumps helps
BigB's house from
flooding?
Jun 8, 2010
Grundfos DPK | High
Pressure and Reliable
Drainage Pumps
May 14, 2010
Grundfos Solutions |
Increasing performance
in Industrial Process
Apr 22, 2010
Grundfos Solutions |
Increasing performance
in Plant Service Systems
March 26, 2010
Grundfos Dosing &
Disinfection | Get the
right mix
March 12, 2010
Grundfos Direct Sensors
March 2, 2010
Grundfos Fire Protection
Solutions | Fire protection
you can count on
February 11, 2010
Grundfos in Burj Khalifa |
A towering achievement
Grundfos pumps secure
clean water for thousands
of people in Haiti
February 10, 2010
Tranter plate & frame
heat exchangers |
Bringing efficiency to heat
transfer
February 4, 2010
TRANTER Econocoil | An
efficient & versatile light
duty plate type heat
exchanger
January 29, 2010
TRANTER | Gasketed and
welded heat exchangers
for every need
January 22, 2010
Unilift CC | Multi-purpose
submersible drainage
pumps
January 14, 2010
Grundfos TP | The widest
range of in-line choices
January 7, 2010
GRUNDFOS END-suction
range | Perfection under
high demands
January 1, 2010
Grundfos Alldos OXIPERM
PRO - Effective and safe
disinfection with Chlorine
Dioxide
December 25, 2009
Replace it - even if it isn't
broken
December 19, 2009
Grundfos in Boiler Feed
Systems
December 12, 2009
Grundfos - Wastewater
December 5, 2009
Grundfos - PUMP AUDIT
November 28, 2009
Magnetic Drive Pumps
from Grundfos
CRN MAGdrive